High dc motor ac power Custom made in China – replacement parts – in Valencia Venezuela Speed Hand-Fed Platen Die Cutting and Creasing Machine with top quality

High dc motor ac power Custom  made in China - replacement parts -  in Valencia Venezuela   Speed Hand-Fed Platen Die Cutting and Creasing Machine  with top quality

We – EPG Team the most significant worm gearbox, couplings and gears manufacturing unit in China with 5 distinct branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

 

  • Requirements:
Design Device MY1two00EP MY1300EP MY1five00EP
Max. Paper Dimensions mm 1200*780 1300*960 1500X1100
Min. Paper Dimensions mm 350*350 400*410 540X410
Max. Die-chopping Measurement mm 1180*760 1280*940 1480X1080
Max. Speed sh/h -5500 -5500 -4500
Max. Wor ept Pressure T 300 three hundred three hundred
Max. Paper Thickness mm 1-seven one-7 1-seven
Die-slicing Precision mm ±0.5 ±0.5 ±0.5
Total Power KW 15 15 19
Whole Bodyweight KG 14500 16000 19000
General Dimension mm 7730*4230*2345 8250*4530*2345 8750*4795*2405
  • Functions of the device:

Major Attributes:

  • The Bobst kind minimize composition can make the reducing system motion like a scissor, it will realize a entire and less difficult reduce.
  • Principal worm gear employs alloy copper material, after the seasoned operator’s guide scraping treatment and strict common tests, it can assures the driving areas 10 a long time lifestyle.
  • The principal chains undertake imported British Renold manufacturer, the variances of 10 chains are significantly less than .2mm.
  • The connect amongst equipment box and driving shaft adopts sleeve and pin framework making certain a sturdy connection.
  • Velocity:  

The equipment adopts frequency controller to accomplish stepless pace acceleration which can achieve to 4500 instances for every hour. During actual creation, it can usually run at 3800 to 4300 times for every hour according to the top quality of the board. If the good quality of the paper is very good, a very good operator even can run the device at above 4300 instances for each hours.

  • Security:

As it is proven in the photograph of the device, the machine adopts rear element paper feeding method which preserve the operator away from the die-chopping component. The mounting and adjustment of the die plate is also carried out outdoors of the die-chopping element with sensors and detectors at die-cutting portion to ensure that the machine can not be started out when the die-reducing plate is at adjustment position.
Besides the sensors at die-reducing portion, there are sensor or approach switches at window portion to make the whole equipment at monitoring position to make sure its security.

  • Procedure convenience:

There is Man-equipment interface installed in the control panel which will exhibits the protection status of the machine as properly as malfunctions to aid the operator. Camera is also set up in front of the operator for him/her to check the operation position at the shipping component.

  • Main Structures and Key Materials Employed
    • Four Major Massive Components:

They are referring to: bottom station, relocating system, higher system and device wall. The base station is produced of gray cast iron -HT two hundred the shifting system is ductile iron – QT 42-ten and the machine wall is high quality A3 metal.

  • Main Push:  

 

The 11 KW Siemens Motor together with the pneumatic clutch, worm shaft and worm gear kinds a relocating set to make sure stable pressure out put of not considerably less than 300 tons.
 

The content for the worm shaft is 40Cr with quenching treatment method and gear hardness HRC forty five-50. The material for the worm is copper alloy – ZQAL9-4.
The bearing that is utilized is SKF. The bush is copper alloy ZQSn6-6-3.

  • Die-reducing and Creasing Component:

The generate is transferred by way of crank rod to pendulum which will bring the shifting platform to move up and down to get to die-lower and creasing function.
The pendulum is created of substantial good quality ductile iron. The pendulum axis is done by induction harden with area hardness HRC 43-forty eight. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely stick to the specification of 1080 sort automatic die-cutting and creasing device. In comparison with computerized die-reducing and creasing device which is used for cardboard die-cutting, this variety of semi-automatic die-slicing and creasing equipment is mostly utilised for corrugated board which demands much less stress for die-cutting, in this scenario fairly some producers have created smaller sized width on the pendulum and smaller diameter on the pendulum shaft. We preserve wider pendulum and larger diameter on its shaft to make our device very last for a more time life.
The die-slicing plate employs 7 mm seventy five Crl plate which has far more hardness and life span than the manganese plate.  

  • Board Conveying:

 

It adopts 3-cam intermittent positioning unit to ensure the boarding conveying accurate and secure.
The device employs gripper bar type with 12A extended joints chain which is considerably less in excess weight and considerably less shock to the intermittent device underneath the precondition to make certain the toughness of the chain. The manufacturer of the chain is Renold U.K with substantial precise and high quality. .    
The Gripper bar adopts aviation aluminum with three bridge sort- light in fat and substantial in power.

  • Electrical Component

 

The electrical elements are developed and assembled in accordance to the European CE regular and utilizes world wide identified manufacturer goods.

  • Set up of Die

The die mounting and dismounting adopts side withdrawing techniques which time conserving and simple for procedure.
There are two approaches for the fixation of the die-possibly by bolt or clippers which are subject to customer’s tips.
The chase loc ept is pneumatic which is easy, practical and trustworthy.

  • Special People of Our Equipment:
    • Clever And Specific Entrance Lay Layout:

When compared with the card board sheet, the corrugated board has far more toughness. If the corrugated board abnormally reaches to the front lay, it will damage the front lay and the gripper bar when the entrance lay reaches to its greatest situation.
Usually the producers will set up sensors on this element to end the equipment when the paper is fed abnormally to the entrance lay. Nevertheless, when the device is running at the substantial speed, the inertia will deliver the machine to run for a even though to make the front lay to its highest stage and then also injury the front lay and the gripper bar.
Our special design and style is that when the abnormal board feeding transpires and currently being detected, the entrance lay can in no way reaches to its optimum stage which tends to make cost-free from entrance lay and gripper bar damages simply because of abnormal paper feeding.
As it is our special design, so there is no photograph to be shown here.

  • Optional Delivery System:

In accordance to the requirement of the client we can do the supply platform both sq. kind or E type (as proven in the photo) . If the customer has adequate pallets, he can decide on square type. If the customer does have enough pallet, he can pick, E sort platform for which will also give 4 delivery trolleys.

  • Pneumatic Preloading and Lifting Phase Unit:

The preloading system is pneumatic driven. When 1 paper dimensions is set, when you do other pile of preloading, there is no hassle of you to reset the preloading gadget, you can just push the button and the equipment will do for you.
The lifting step device is also pneumatic to facilitate the conveying of the paper pile.

  • Dancing Roller Feeding:

Quite some of the die-cutting device producers use immediate feeding approach which is the operator will feed the board straight to the mouth of the gripper. What we have located that the feeding time to the gripper is only .3 seconds which tends to make the board feeding work hard and inaccurate.
Our machine uses an further dance roller feeding program whose board feeding time can be lengthen to .6 2nd. Collectively with the conveying parts it makes an less difficult function of the operator and more rapidly in performance of the equipment.
For example:  If an operator operates the immediate feeding semi-automatic die-cutting equipment at 3300 sheets for each hour, he can easily operate our device at 3700 – 4000 sheets for each hour.

  • Conveying Component:

 

The board obtained by the dance roller will go through a conveying element with belt conveying and belt pressing which helps make the board being pressed ahead of achieving to the entrance lay.
Prior to the board reaches to the front lay, he will be repositioned by the aspect lay.
By these ways, the board conveyed by the dance roller will be far more accurate and steady when they get to to the gripper bar.
There is also detector to detect the status of the board. If board does not appear to the front lay at typical situation, the detector will ship indicators to quit the device.

  • Striping Component
    • Striping is 50 % striping which can strip off three – edge waste of the board.
    • There are higher chase, center chase and decrease chase the place the male, elastic block and woman die are put to strip off the squander.

 
 
 

  • Configurations:

 

Name Manufacturer and Origin Remarks
Bearing SKF Swiss Key part
IKO Japan or HangZhou, China Not important component
Chain Renold U.K Main Chain ( Discrepancy of considerably less than .2 mm for per 10 chains of equipment chain size)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Picture Electrical Swap Fotek ZheJiang  
Stabilizer MEANWELL ZheJiang  
Variator Delta ZheJiang  
Principal Motor Siemens Joint Venture
PLC Delta, ZheJiang  
Gentleman-equipment Interface Delta  
Pneumatic Components Dawn, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and shipping and delivery CPG ZheJiang  

 
 

/ The use of authentic tools manufacturer’s (OEM) part quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the listed substitution parts contained herein are not sponsored, authorized, or manufactured by the OEM. /

High dc motor ac power Custom  made in China - replacement parts -  in Valencia Venezuela   Speed Hand-Fed Platen Die Cutting and Creasing Machine  with top quality

High dc motor ac power Custom  made in China - replacement parts -  in Valencia Venezuela   Speed Hand-Fed Platen Die Cutting and Creasing Machine  with top quality

mh coupling

As one of leading mh coupling manufacturers, suppliers and exporters of products, We offer mh coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of mh coupling

Recent Posts