“H” Class Mill Chain is surely an ex-tremely sturdy, serviceable chain originally de-signed for hefty drives and transfer conveyor functions in saw mills plus the paper and pulp sector. “H” Class Chain has confirmed itself for innumerable other industrial applications as well, particularly for moderate duty in abrasive atmospheres where heavy, rugged chain is re-quired.
The sidebars of the “H” Class back links are rein-forced with wearing footwear which strengthen and stiffen the back links when it can be operated in troughs or over ?oors and runways.
Pin holes are precision cored to assure accu-rate pitch sizes, which range from 2.308 to 4.000 inches. “H” Class Chain is accessible in the two riveted and cottered development. T-head pins engage two lugs cast within the links’ 
side-bars. This con?guration prohibits pin rotation during chain operation, eliminating abrasive put on and pitch elongation.
“H” Class Chain conforms to manufacturer’s standards and is entirely interchangeable with chains of other makers. “H” Class Chain is available in -Locke Promal with tensile ranges of 9,450 to 40,500 pounds.
“H” Class Chain may well operate in two directions. Like a drive chain, it travels from the direction of your closed barrel; for elevator or conveyor applications, it ought to travel towards the open ends of the backlinks.
Brutaloy or cast steel sprockets are available to accommodate each “H” Class pitch size. A wide assortment of attachments can also be avail-able for varied chain applications.
“H” CLASS MILL CHAIN
Tags: