Carbon China in Bloemfontein South Africa Steel Hook Trailer Hook for Winch Winch Hook with ce certificate top quality low price

Carbon  China  in Bloemfontein South Africa  Steel Hook Trailer Hook for Winch   Winch Hook with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Carbon steel Hook/Trailer Hook for winch / Winch Hook

– Special specification and marks can be made according to customers
– Packing: Packed in cartons with plastic bags inside on iron pallets
– full tracebility

Care in Use
1. For hooks used in frequent load cycles or pulsating loads, the hook and threads should periodically be inspected by Magnetic Particle or Dye Penetrant. (Note: Some disassembly may be required. )
2. Never use a hook if its throat opening has been increased, or its tip has been bent more than 10 degrees out of plane from the hook body, or is in any EPT way distorted or bent. Note: A safety catch will not work properly on a hook with a bent or worn tip.
3. Never use a hook that is worn beyond a recommended maximum of 8%.
4. Remove from service any hook with a crack, nick, or gouge. Hooks with cracks, nicks, or gouges shall be repaired by carefully grinding lengthwise, following the contour of the hook, provided that the reduced dimension is within the 8% wear limit.
5. Never repair, alter, rework, or reshape a hook by welding, heating, burning or bending.
6. Never side load, back load, or tip load a hook.
7. Eye hooks, shank hooks and swivel hooks are designed to be used with wire rope or chain. Efficiency of an assembly may be reduced when used with synthetic material.
8. Always make sure the hook supports the load. The catch mu EPT never support the load.
9. When placing two sling legs in a hook, make sure the angle from the vertical to the outermo EPT leg is not greater than 45 degrees, and the included angle between the legs does not exceed 90
Degrees.
10. The W EPT of a hook applies only when the load is correctly positioned on the load line of the hook. If the hook is eccentrically loaded, or the load is applied EPT than on the load line, the W EPT is greatly reduced.
11. Always use a swivel hook, or insert a swivel link between the load hook and the lifting rope, when the load has a tendency to rotate when lifted.
12. Always check to ensure that the hook safety catch has closed correctly before allowing the load to be lifted

ITEM NO Size DIMENSIONS (in) Breaking Strength N.W.
(in) B R O T kg kg
ZHG70-THF-1 3/4 0.75 2.81 0.71 0.59 3000 0.25

ITEM NO Size DIMENSIONS (in) M.B.S. N.W.
(in) B R kg kg
ZHG70-THF-1A 3/4 0.72 2.57 2500 0.16
ZHG70-THF-2A 3/4 0.72 2.57 2500 0.16

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Carbon  China  in Bloemfontein South Africa  Steel Hook Trailer Hook for Winch   Winch Hook with ce certificate top quality low price

Carbon  China  in Bloemfontein South Africa  Steel Hook Trailer Hook for Winch   Winch Hook with ce certificate top quality low price

Carbon  China  in Bloemfontein South Africa  Steel Hook Trailer Hook for Winch   Winch Hook with ce certificate top quality low price

Tags:

mh coupling

As one of leading mh coupling manufacturers, suppliers and exporters of products, We offer mh coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of mh coupling

Recent Posts